Portchullin’s next outing will be this forthcoming weekend; 18/19 May at Bracknell Leisure Centre, Bracknell, RG12 9SE.
We’ll be taking you back to the 1970’s where blue and grey ruled in the western highlands, with the odd stray green one………….
Pop by and say hello?
Portchullin is a cover girl again, as it features on the front cover of the DVD supplement that accompanies the just available (perversely February 2019) British Railway Modelling.
It features me blathering on about the inspiration for the layout, the origins of the real line and the prompting of its building. I even managed to remember to thank Peter for building the signal cabins this time, so hopefully he will not cold shoulder me for six months this time……………..
This DVD is only available with the subscription copy or if you take it in a digital format, so you can not rush down to WHSmiths to get it – I dare say that this is the publishers of BRM seeking to encourage you to take out a subscription!
In addition to this (and probably partially as a result), Portchullin has also got itself nominated into the BRM/RMweb’s 2018 British Railway Model Awards – click the banner at the head of their website here. It would be great to see the layout do well in the poll, so if anyone fancies doing a bit of voting, all contributions would be gratefully received!!
If you wish to see Portchullin in the flesh, its next outing is in May at ExpoEm in Bracknell. Look forward to seeing you there.
Over the last few weeks, I have been revisiting a number of model coaches that I have built in the past, typically quite some time in the past as most of these have been around since either my teens or twentys!
Over the years techniques have changed and I undoubtedly would not build most of them in the manner that I originally built them if I was confronted with doing them again. Having said this, on the whole my handiwork – especially in respect of the painting and lining was really quite good. I seem to have lost my lining mojo in particular, so I am not sure I could line as well as this now. This is something that I really must get to grips with this, as I still have a lot to do!
a pair of full brakes, the one to the left is a West Coast Joint Stock (from a London Road Models kit) and that to the right is straight LNWR (from a Microrail kit)
But the biggest area of difficulty with the coaches is that the bogies were generally formed around beam compensation units. These are OK for a couple of coaches behind a branch train but they impart far too much friction for a full main-line train as I aspire too. This is impossible to overcome whilst retaining the compensation units, the bar is the cause of the problem and it has to go!
To overcome this, Bill Bedford sprung boiges are being retro-fitting to all of my existing stock. These rely on separate hornblocks that secure a pin-point bearing in them – so rolling resistance is significantly reduced. The hornblocks are held in place by way of guitar wire and the effect is that they glide around the trackwork. They thus give the impression of weight and inertia that is much better than compensation (it is possible to get compensation that does not use the rocking beams that are the cause of the fritchion I am complaining about).
A Midland & North British luggage composite (from a PC Models kit) and a LMS (ex Midland) dining car (from a 5522 Models kit).
The Bill Bedford units are only an inner bogie and they still need to have some form of detailing on the outside. Some of these have entirely cosmetic outers, either of plastic or white metal but the two Midland coaches and the Highland TPO have something slightly different. On these, I utilised the original etched bogie sides and laminated them onto the Bill Bedford inners. This is very successful as it improves the Bill Bedfords notably by making them a lot stiffer and you get the crispness of the etching process.
This is one of my fathers, so I can’t claim credit for anything but the bogies. A Highland Railway TP (fully scratchbuilt). Obviously, no painting has as yet been done, so it does rather look like a ganster with gold teeth!
It is rather challenging to see how the Bed Bedford sprining unit sites inside the outer skins (from a Lochgorm kit) – so I will write up the process in a future blog – but this is what it looks like from the outside.
If, by the way you fancy some Fox Pressed Steel bogies that are neatly sprung and look the part – and almost all pre-group modellers ought to – keep watching the space. Subject to a test build or two, there will shortly be one available on the market.
To test them, I took them and a few other coaches to ExpoEM to use their test track. Here we see a Barney with eight on – albeit a rather od mix for the train and there is a fair amount of painting and lining still to be done.
And to prove that they really do work and also to allow you to see how they glide, a quick youtube video: https://www.youtube.com/watch?v=6D7a_cWwGhg&feature=youtu.be